• NIST Calibration Included
• Measures AC/DC voltage up to 600V, AC/DC current, resistance, frequency, capacitance, duty cycle and temperature
• CAT III 600V safety rated
• Non-contact voltage detection enhances safety
• Audible continuity quickly identifies shorts and opens
• Diode test to verify diode polarity
• Data hold freezes the reading on the display for further analysis
• MIN/MAX recording records min/max measurements over time to show voltage fluctuations
• Relative zero mode displays the difference between the actual reading and a stored reference value and may be used with any function or range
• Offers user friendly features, including auto power-off to conserve battery life, low battery warning, "third hand" test probe holder, built-in test leads storage, a built-in flashlight, and a Velcro strap to hang the meter
• Auto and manual-ranging delivers maximum flexibility
• Backlit LCD display makes it easy to view results

• AC Voltage:
• Range: 400 mV, 4.000 V, 40.00 V
• Accuracy:  +/- (1.0 % rdg + 3 LSD)
• Range: 400.0 V, 600 V
• Accuracy: @ 45 Hz to 400 Hz, 4 V to 400V ranges
• DC Voltage:
• Range: 400 mV, 4.000 V, 40.00 V
• Accuracy: +/- (0.8% rdg + 1 LSD)
• Range: 400.0 V, 600 V
  
• Accuracy: @ 4 V to 400 V ranges
• Resistance:
• Range: 400.0 µA, 4000 µA; 40.00 mA, 400.0 mA; 4.000 A, 10.00 A
• Accuracy:  +/- (1.2% rdg + 3 LSD)
• AC Current:
• Range:  400.0 µA, 4000 µA; 40.00 mA, 400.0 mA; 4.000 A, 10.00 A
• Accuracy:  +/- (1.0% rdg + 2 LSD)
• DC Current:
• Range: 400.0 Ω; 4.000 kΩ, 40.00 kΩ, 400.0 kΩ, 4.000 MΩ, 40.00 MΩ
• Accuracy: +/- (1.0% rdg + 2 LSD) @ 4 kΩ to 400 kΩ ranges
• Battery test: 0.1% to 99.9%  
• Duty cycle:
• Range: 1.5V, 9
• Accuracy: +/- (1.0% rdg + 3 LSD)
• Ambient temperature:
• 23°C ±5°C (73.4°F ±9°F)
• Relative temperature:  =75%
• Accuracy: ±(% of reading + digits)
• Maximum voltage between input terminal and earth ground: AC 600Vrms or DC 600V
• Fuse for mA µA input: 0.5A H 600V fast-fuse, (Φ6×32)mm
• Fuse for 10A input: 10A H 600V fast-fuse, (Φ6×32)mm
• Maximum display: Digital 3999 counts, updates 3/sec. Frequency: 4999 counts
• Over-range indication: OL
• Range: Automatic
• Altitude: Operating = 2000m
• Operating temperature: 0°C ~ +40°C (32°F ~ 104°F)
• Relative humidity 0°C: ~ +30°C (32°F ~ 86°F) =75%; +30°C ~ +40°C (86°F ~ 104°F) =50%
• Storage temperature: -10°C ~ +50°C (14°F ~ 122°F)
• Electromagnetic compatibility: In an RF filed of 1V/m = Speci?ed accuracy ±5%
• Battery: 9V, 6F22, NEDA1604 or equivalent
• Dimensions (L x W x H): 182 mm x 90 mm x 45 mm (7.2 in x 3.5 in x 1.8 in)
• Weight: Approx. 354g (0.78lb) with batteries installed

DC Voltage Measurement

• Input impedance: around 10MΩ; (Input impedance > 3GΩ for DC 400mV range)
• Overload protection: ?600V

AC Voltage Measurement

• Note: 400.0mV range is available for manual range only.
• Input impedance: around 10MΩ
• Frequency response: 45Hz ~ 400Hz

Average sensing, rms indication:

• Overload protection: 600Vrms

Resistance Measurement

• 400Ω range: Measured value = (Measured display value) ? (Short-circuiting value of probe)
• Open circuit voltage: around 0.5V
• Overload protection: 600Vrms

Continuity and Diode measurement

• Overload protection: 600Vrms

Capacitance Measurement

• Overload protection: 600Vrms
• Measurement of frequency/duty cycle
• Overload protection: 600Vrm
• Input amplitude (DC level is 0.)
• 10Hz~1MHz: 300mV ≤ a ≤30Vrms
• >1MHz~10MHz: 600mV ≤ a ≤30Vrms
• Input amplitude and frequency response must meet following conditions when reading frequency or duty cycle during AC voltage or current measurement
• Input amplitude = Range × 30%
• Frequency response: =400Hz

Battery Test:

• Overload protection: F1 fuse, 0.5A H 600V fast-fuse, (Φ6x32)mm
• For 1.5V range: Load resistance is around 30Ω.
• For 9V range: Load resistance is around 1kΩ

DC Current Measurement

• Overload protection: mA /μA input:F1 fuse, 0.5A H 600V fast-fuse, (Φ6x32)mm
• 10 A input: F2 fuse, 10A H 600V fast-fuse, (Φ6x32)mm

AC Current Measurement

• Frequency response: 45Hz ~ 400Hz Average sensing, rms indication
• Overload protection: mA /μA input:F1 fuse, 0.5A H 600V fast-fuse, (Φ6x32)mm
• 10 A input: F2 fuse, 10A H 600V fast-fuse, (Φ 6x32)mm

• (1) AM-510 Multimeter
• (1) 9V (6F22) Battery, Installed
• (1) Test leads
• (1) Users manual

Brochure/Datasheet

Instruction Manual

Download

Note: Prices are not binding at any time subject to change without prior notice